SARGA BODYWORK
  • HOME
  • SARGA
    • WHAT IS SARGA BODYWORK?
    • WHO WE ARE >
      • FOUNDERS
      • INSTRUCTORS
      • THERAPIST DIRECTORY
    • TESTIMONIALS
    • MEDIA >
      • VIDEO
      • SOCIAL MEDIA
      • PRESS
  • COURSES
    • ONLINE COURSES
    • IN-PERSON COURSES
    • IN-PERSON COURSE CALENDAR
  • STORE
  • SUPPORT
    • MORE INFO + FAQ
    • CONTACT
INSTALLING THE SARGA LOOPS FOR STATIONARY/ELECTRIC MASSAGE TABLES:
​
SAFETY & SETUP INSTRUCTIONS

​These instructions outline the installation of the Sarga Loops for Stationary/Electric Massage Tables. These hardware accessories are available at Sarga Bodywork's online Graduate Store and have a 500lb+ working load limit per loop. Note that they will fit most stationary/electric massage tables (both metal and wood), however since the Earthlite Ellora Lift Massage Table tends to be the most common stationary/electric massage table, these hardware accessories are provided with that model in mind. In addition, the pictures provided here and in the video instruction of this installation on the Sarga Bodywork Community Facebook Page feature an Earthlite Ellora Lift Massage Table. For a tool-free alternative to this application, see The Sarga Attachment for Stationary/Electric Massage Tables.

DISCLAIMER
Altering your massage table in any of the ways detailed below may void any equipment warranty or liability coverage associated with your massage table. Sarga Bodywork assumes no responsibility for improper installation of the Sarga Loops for Stationary/Electric Massage Tables or structural weakness caused to your massage table as a result of the proper or improper installation of this hardware. While Sarga Bodywork has had years of experience using and installing the Sarga Loops for Stationary/Electric Massage Tables and believes it to be a safe and secure application, by continuing to follow the information provided here, you, the consumer, agree to assume all risk in the installation and usage of these hardware items, for both home and/or professional use. Sarga Bodywork only sells its proprietary equipment to graduates of its live courses, who have undergone proper training in the safety and use of this equipment. As a student of a Sarga Bodywork course you have agreed to assume all risk and liability in the use of this equipment, however if you disagree in any way with the information provided here, or do not want to assume full responsibility for the proper installation and usage of Sarga Bodywork's equipment, you must not proceed with these instructional directives.
 
SAFETY 
As always, you and your clients’ safety are primary! Please have your Sarga Loops for Stationary/Electric Massage Tables installed by a professional. Your safety, the integrity of your massage table, and your clients' safety depend on it! Any weak points in the installation of these hardware accessories would likely be a result of how the loops are installed, i.e. using the proper tools and securing the hardware adequately. Our best advice is to communicate what they will be used for to the professional who will be installing your loops and to verify that he/she believes it to be a safe and secure application. After installation, be sure to routinely check your hardware (like climbers check their gear), to make sure
that nothing has loosened with use.

Picture
Picture
​1. Sarga Loops for Stationary/Electric Massage Tables + hardware. Product link here.​
6. Drill holes.​
​
Picture
2. Hardware parts include 2 rope loops and 8 of each: countersunk phillips bolts, regular washers, lock washers, lock nuts.
Picture
3. Measure to center. Note that some tables will have a center cross-brace; install your loops on the face-cradle side of this cross-brace, as close to the center of the table as possible.
Picture
7. Screw loop into position.

​
Picture
8. Tighten screws. Repeat steps 3-8 on the other side.

​
Picture
4. Hold up loop for placement, keeping it in a horizontal alignment, close to the bottom edge of the metal frame.
Picture
9. Done.
Picture
​5. Mark all four drill holes.
Picture
10. Ta-Da!



Copyright 
© 2018 Sarga Bodywork. All Rights Reserved.

COURSES

Online Courses
In-Person Courses​
In-Person Course Calendar

STORE

Equipment
MYO.RUB​
Lomi Balls

SUPPORT

​More Info + FAQ
​Shipping & Returns
​​Course Policies
CONNECT
Contact Us
Sign up for emails
​833-SARGA88


TERMS  /  PRIVACY POLICY  /  TRADEMARK & PATENT  /  ​DISCLAIMER  /  ​© COPYRIGHT SARGA BODYWORK 2020
  • HOME
  • SARGA
    • WHAT IS SARGA BODYWORK?
    • WHO WE ARE >
      • FOUNDERS
      • INSTRUCTORS
      • THERAPIST DIRECTORY
    • TESTIMONIALS
    • MEDIA >
      • VIDEO
      • SOCIAL MEDIA
      • PRESS
  • COURSES
    • ONLINE COURSES
    • IN-PERSON COURSES
    • IN-PERSON COURSE CALENDAR
  • STORE
  • SUPPORT
    • MORE INFO + FAQ
    • CONTACT